Full Panel Repair-Picture Frame Without Blending

1. Wet sand the complete panel with # 400 grit sandpaper.

2. Apply primer-surfacer as required. Follow labeled instructions.

IMPORTANT:
For best results, light color primers or sealers should be used under the base white coat.

3. Compound or wet sand the complete panels that will be blended into using ultra-fine or finer sandpaper. Wash entire area with a cleaning solvent.

4. Apply base color to hide. Use let-down panel to determine how many pearl luster coats will be required.

5. Apply pearl luster coats over the complete panel until color match is acquired. Allow sufficient flash time between coats.

6. Apply clearcoats over the complete panel.