Trailing Arm: Service and Repair

REMOVAL

CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON HOIST. TO HELP AVOID PERSONAL INJURY, PROVIDE ADDITIONAL SUPPORT TO THE OPPOSITE END OF THE VEHICLE THAT COMPONENTS WILL BE REMOVED FROM.

1. Raise vehicle on hoist.
2. Remove trailing arm-to-knuckle fastening nut.
3. Remove two trailing arm-to-body fasteners.
4. Slide trailing arm from knuckle.

INSTALLATION
1. Install trailing arm into knuckle and hand tighten fastener nut.
2. Install trailing arm into body and secure with fasteners.

Torque: 120 Nm (89 ft. lbs.)

3. Secure trailing arm to knuckle fastener.

Torque: 100 Nm (74 ft. lbs.)