Installation

NOTICE: Before installing wheels, remove rust or corrosion from wheel mounting surfaces and brake rotors/drums. Failure to do so can cause wheel nuts to loosen in service.

1. Position wheel onto hub.
2. Install wheel nuts and tighten in a crisscross pattern. Repeat tightening pattern to be sure torque is correct.

Torque: 140 Nm (103 ft. lbs.)

3. For steel wheel and optional aluminum wheel with large round center hub cap, install wheel cover or cap onto wheel. Hand tighten all four of the cap nuts with the aid of a socket. Then, with a wrench, tighten each of the caps an additional 1/4 turn (90°).
4. Lower vehicle from hoist.