Air Conditioning Switch: Service and Repair

A/C-RECIRC SWITCH






REMOVAL

1. Carefully remove A/C-Recirc switch package by lifting at outer edge with a small screwdriver.
2. Disconnect electrical connector.

INSTALLATION

1. Connect electrical connector.
2. Install A/C-Recirc switch package through opening and push straight in.

BULB






REMOVAL

1. Remove A/C-Recirc switch package by lifting at outer edge with a small screwdriver.
2. Turn bulb socket counterclockwise and remove.

INSTALLATION

1. Insert bulb into opening and turn clockwise to lock.
2. Install A/C-Recirc switch package through opening and push straight in.

CONTROLLER KNOB






REMOVAL

Pull controller knob off of control lever.

INSTALLATION

Push knob over end of control lever.