Removal

1. Remove end cover. Refer to "End Cover" removal procedures in the "In-Vehicle Service" in Automatic Transmission/Transaxle / Service and Repair.
2. Remove the 1st clutch, 1st drive gear, and 1st driven gear. (Refer to "1st Clutch, 1st Drive Gear, and 1st Driven Gear" removal procedures in the "In-Vehicle Service" in Automatic Transmission/Transaxle / Service and Repair.
3. Remove valve body. Refer to "Valve Body Removal"in Automatic Transmission/Transaxle / Service and Repair.
4. Remove the forward/reverse servo piston cover bolts, remove cover, servo piston spring, servo piston bolt, and shift fork.