Removal

Remote Control Door Lock (RKE) Module Removal:

1. Disengage seat cushion by pushing rearward, then upward at two front retaining locations to release the rear cushion from the retainers.
2. Slide the cushion from under the seat back guiding the seat belt buckle through the seat cushion and remove the seat cushion.

Remote Control Door Lock (RKE) Module Removal:

3. Remove rear seat carpet retainer molding.

Remote Control Door Lock (RKE) Module Removal:

4. Lower rear seat back.
5. Remove body lock trim finish molding by pulling firmly, starting at the bottom of the molding to disengage clips.
6. Slide molding out from under body lock pillar upper trim finish molding.

Remote Control Door Lock (RKE) Module Removal/Installation:

7. Disconnect Remote Control Door Lock (RKE) module connector.
8. Pull firmly on remote control door lock (RKE) module from the top to bottom, to disengage double side tape retainer.
9. Remove remote control door lock (RKE) module.