Window Guide

REMOVAL
1. Remove door trim panel. Outer panel is removed in illustration to show location.
2. Remove door window.
3. Remove rear door frame outer seal.
4. Remove bolt, drill out rivets, and remove window guide.

INSTALLATION
1. Reinstall window guide with new rivets and reattach lower bolt loosely.
2. Reinstall rear door frame outer seal.
3. Reinstall door window and check for proper operation and alignment.
4. Tighten window guide.

Torque: 7.5 N.m (66 in-lbs)

5. Reinstall door trim panel.