ABS Scan Tool Information

LF Wheel SPD MPH Displays the speed of the left front wheel.

LR Wheel SPD MPH Displays the speed of the left rear wheel.

RF Wheel SPD MPH Displays the speed of the right front wheel.

RR Wheel SPD MPH Displays the speed of the right rear wheel.

Vehicle Ref MPH Displays the filtered average of all four wheel sped sensors.

Brake Switch Displays the current status of the brake switch circuit is detected.

Brake Switch Open Displays YES when an open brake switch circuit is detected

Brake TT Displays On when the brake tell take is on.

Brake Switch Cycle Displays YES if the brake switch has been cycled this ignition cycle.

Brake TT Open Displays On when an open brake telltale circuit is detected.

ABS Stop Displays YES when the vehicle is an ABS stop.

25 MPH Reached Displays On when the vehicle has reached 40 km/h (25 mph) during this ignition cycle.

LF Commanded Amps Displays the left front desired motor current during an ABS stop.

LF Sensed Amps Displays actual left front motor current during an ABS stop.

RF Commanded Amps Displays the right front desired motor current during an ABS stop.

RF Sensed Amps Displays actual right front motor current during and ABS stop.

Rear Commanded Displays in amps, the rear desired motor current during an ABS stop.

Rear Sensed Displays in amps, the rear desired motor current during an ABS stop.

LF Brake Displays the left front motor direction (up or down) during an ABS stop.

LF Solenoid-CKT 1288 Displays the status of the left front ABS solenoid. The solenoid is On during an ABS stop.

RF Brake Displays the right front motor direction (up or down) during an ABS stop.

RF Solenoid-CKT 1289 Displays the status of the left front ABS solenoid. The solenoid is On during an ABS stop.

ABS TT Displays On when ABS telltale is being commanded on by the ABS control module.

ABS TT Flashing Displays On when the ABS telltale is flashing.

Enable Relay Displays the status of the ABS enable relay.

Battery Enable Displays the ignition voltage to the ABS control module.

IGN Volts Displays ignition voltage.

Traction Switch Displays Open with traction switch released and Closed with traction switch depressed.

Traction Led Displays On when traction LED is On and Off when traction LED is Off.