Rear Door Glass Replacement

REMOVAL
1. Remove door trim panel. Outer panel is removed in illustration to show location.
2. Remove inner belt seal molding.
3. Remove door frame inner seal fixed glass assembly.
4. Partially remove water deflector to access openings in door structure.
5. Lower door window for access to sash slide clips.
6. Depress retaining clips and slide window insulators (slide clips) from window.
7. Rotate window, push up and then remove from door.

INSTALLATION
1. Install door window into door and align sash with window insulators (slide clips).
2. Slide sash onto insulators.
3. Reinstall door frame inner seal.
4. Reinstall inner belt seal. Check window for proper operation.
5. Reinstall water deflector.
6. Reinstall door trim panel.