AM/FM Stereo Radio

Product Overview: AM/FM Stereo Radio:

FEATURES AND BENEFITS
^ Electronic Tuning:
Automatically lock in station signals for best possible reception.
^ 6 AM / 12 FM Radio Presets:
Programmable by following two steps:
1. Tune in desired station.
2. Push and hold the desired preset button for approximately one second.
^ Seek Tuning:
Provides tip and down seek capability for radio bands. An audible tone indicates seek mode tuning.
^ Automatic Loudness Compensation
Full depth of sound can be heard at low volume levels.
^ Rotary Pop-Out Treble, Base, and Fade Controls:
Pop-out controls allow treble, bass, and fade adjustments, then the controls "push-in" out of the way.
^ Clock:
The time of day will be displayed when:
1. The ignition is turned off and the radio power is either on or off.
2. The ignition is turned on and the radio power is off.
3. The ignition is turned on, the radio is on, and a tune, seek, or preset function has not been active for 5 seconds.
To set the time of day
1. Push and hold the Recall knob.
2. Within 5 seconds, push the left side of the Tune/Seek button until the correct hour appears.
3. Push the right side of the Tune/Seek button until the correct minutes appear.
4. Release the Recall knob.

^ Dimming:
All radios feature continuously dimmable nighttime incandescent backlighting for the graphics on the pushbuttons and trimplate. The incandescent backlighting voltage is supplied from the vehicle light switch. The internal lamps are returned to battery (-) through the vehicle low side Pulse Width Modulated (PWM) dimmer control circuit.

The LCD display is backlit whenever ignition voltage is applied regardless if the radio power knob is on or off. When the vehicle's exterior lights are turned on, the Interior Lights knob, which is found to the left of the steering wheel, can be turned to adjust the illumination of the radio. Turning the knob clockwise makes the light get brighter, while turning the knob counter-clockwise results in the light being dimmer.