Stoplamp Switch

REMOVAL




1. Remove left lower I/P closeout panel (hush panel) push pins and remove.




2. Disconnect electrical connector.
3. Disconnect switch by rotating it 180 degrees and then pull out of bracket.

INSTALLATION




1. Install switch into bracket and rotate 180 degrees.
2. Install electrical connector.
3. Install left lower I/P closeout panel (hush panel).




4. Disconnect cruise throttle cable from module by rotating 1/4 turn counterclockwise.
5. Remove cable from connecting strap.
6. Remove cruise control module.

INSTALLATION




1. Connect cruise control throttle cable to cruise control module connecting strap.

IMPORTANT: Do not twist connecting strap during installation.

2. Install cruise control throttle cable to cruise control module by rotating 1/4 turn clockwise.
3. Install cruise control module to bracket.




4. Install cruise control throttle cable tab to throttle body cam.
5. Adjust cruise control throttle cable and lock in adjuster.
6. Install electrical connector.