Windshield Upper Reveal Molding Replacement

Windshield Upper Reveal Molding Replacement

Removal Procedure


Important: The windshield molding can only be replaced by removing the windshield and then removing and installing a new windshield molding.


1. Remove the windshield. Refer to Windshield Replacement (Windshield Replacement) .




2. Remove the upper windshield molding from the windshield.
3. Clean the old adhesive from the glass using isopropyl alcohol.



Installation Procedure





1. Install the windshield upper reveal molding.

Important: The adhesive is already in the service part. No additional adhesive is necessary.


2. Install the windshield. Refer to Windshield Replacement (Windshield Replacement) .