Front Crankshaft Seal: Service and Repair

- TOOLS REQUIRED
- J-35268-A Seal Installer





1. Using a seal removal tool or screwdriver, remove oil seal from front cover.
a. Clean seal bore and oil drain back passage way.
b. Ensure that the oil drain back passage is free of RTV or debris.





2. Install oil seal.
a. Install new oil seal using seal installer J-35268-A and arbor press.

IMPORTANT: Always ensure that the oil pump cover is properly supported when installing seal.

b. Ensure that front main oil seal is fully and evenly scaled.
c. Apply thin film of oil to seal lip.