10. Intake Camshaft, Bearing Cap, and Lash Adjuster Removal

REMOVAL

IMPORTANT: Remove each bolt on each cap one turn at a time until there is no spring tension on the camshaft.

IMPORTANT: Mark bearing caps to ensure they are installed in the same position.





1. Remove intake camshaft bearing cap bolts.
2. Remove camshaft bearing caps.
3. Remove intake camshaft.

IMPORTANT: Keep all of the roller finger followers and hydraulic element adjusters in order so that they can he reinstalled in their respective locations.





4. Remove intake camshaft roller finger followers.





5. Remove hydraulic element adjusters.