63. Intake Manifold Installation

1. install intake manifold studs in cylinder head.
- Torque: 6 Nm (60 inch lbs.)





2. Install a new intake manifold gasket on intake manifold.
3. Install intake manifold.
4. Install intake manifold bolts and nuts. Tighten by starting with center bolt and working outward.
- Torque: 10 Nm (89 inch lbs.)





5. Install fuel rail assembly.
6. Install fuel rail stud.
- Torque: 10 Nm (89 inch lbs.)





7. Install new throttle body studs if necessary.
- Torque: 6 Nm (60 inch lbs.)





8. Install throttle body.
- Torque: 10 Nm (89 inch lbs.)





9. Install pressure regulator vacuum harness.