Instrument Panel (IP) - Air Deflector/Louver - Left

REMOVAL




1. Remove L/S lower I/P closeout panel (hush panel) retainers and let closeout panel hang loose.




2. Remove I/P filler (knee bolster) by pulling at attaching clip locations.




3. Remove L/S A/C vent fastener and partially remove vent.
4. Disconnect electrical connection from interior lamp dimmer switch.

INSTALLATION




1. If L/S A/C vent is being replaced, transfer interior lamp dimmer switch to new vent.




2. Connect electrical connection to interior lamp dimmer switch.
3. Install L/S A/C vent fastener.

Torque: 2.5 N.m (22 in-lbs)




4. Install I/P filler (knee bolster).




5. Install L/S lower I/P closeout panel (hush panel) with retainers.