Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2000 >> LS1 L4-2.2L VIN F >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Transaxle Assembly Assembly >> 6. Transaxle Cooler Line Seals Installation

6. Transaxle Cooler Line Seals Installation

Tools Required
- J41239-1 Cooler Line Seal Installer





NOTICE: Failure to lubricate cooler line seals with DEXRON(R) III (P/N 21019228) automatic transaxle fluid before installing the cooler line pipes into the seals may cause damage to seal. Lubricate the inside of both cooler line seals with automatic transaxle fluid DEXRON(R) III.

1. Place a new cooler line seal in the case bore.
2. Install J41239-1 on transaxle case at cooler line bracket bolt hole.
3. Press new cooler line seal in by tightening the seal pressing bolt on the J41239-1 until seal bottoms out in the case bore.
4. Repeat steps 1 - 3 for the second cooler line seal.
pro multis · About Operation CHARM