Rear Transaxle Mount and Bracket (Manual)

REMOVAL





1. Remove rear transaxle mount through bolt.
2. Remove one of three transaxle mount bracket to frame bolts.

CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON HOIST. TO HELP AVOID PERSONAL INJURY, PROVIDE SUPPORT TO THE OPPOSITE END OF THE VEHICLE THAT COMPONENTS WILL BE REMOVED FROM.

3. Raise vehicle on hoist.





4. Remove remaining mount bracket to frame attachment bolts.
5. Remove transaxle mount bracket from vehicle.





6. Remove the transaxle mount to transaxle bolts.
7. Remove transaxle mount from vehicle.

INSTALLATION





1. Install rear transaxle mount into vehicle and tighten fasteners.
Torque: 90 Nm (66 ft. lbs.)





2. Install the two transaxle mount bracket to frame attachment fasteners and tighten.
Torque: 60 Nm (44 ft. lbs.)
3. Lower vehicle from hoist.





4. Install and tighten the transaxle mount bracket to frame attachment fastener.
Torque: 60 Nm (44 ft. lbs.)
5. Install the transaxle mount to bracket through bolt.
Torque: 90 Nm (66 ft. lbs.)