51. Engine Oil Cooler Installation

1. Install engine oil cooler and new O-ring seals.





2. Apply a 2 mm (0.08 inch) bead of Loctite (R) 59OO (or equivalent) in groove around the engine oil cooler cover.





3. Install engine oil cooler cover bolts using torque sequence shown.
- Torque: 30 Nm (22 ft. lbs.)
4. Install engine oil cooler inlet and outlet nuts.
- Torque: 20 Nm (15 ft. lbs.)





5. Install oil feed line to block.
6. Install return line to block.
7. Install oil feed line to engine block.
- Torque: 30 Nm (22 ft. lbs.)
8. Install return line to engine block.
- Torque: 30 Nm (22 ft. lbs.)
9. Install engine oil cooler line clamp
10. Install crank sensor.
11. Install crank sensor bolt.
- Torque: 8 Nm (71 inch lbs.)
12. Install oil filter assembly.
- Torque: 15 Nm (11 ft. lbs.)





13. Install oil feed and install return lines to engine oil cooler. Use four new seals.
- Torque: 30 Nm (22 ft. lbs.)