Center Air Outlet Duct (LHD Only)

REMOVAL




1. Disable the SIR system. (Refer to "Disabling the SIR System".) Disabling and Enabling the SIR System
2. Remove instrument panel.
3. Remove screws and center air outlet duct.

INSTALLATION




1. Install center air outlet duct and screws.

Torque: 10 N.m (89 in-lbs)

IMPORTANT: Make sure that right plastic mounting tab is between knee beam and mounting bracket.

2. Install instrument panel.
3. Enable the SIR system. (Refer to "Enabling the SIR System".) Disabling and Enabling the SIR System