Windshield Washer Solvent Container Pump

REMOVAL




1. From under vehicle, remove front push pin from wheelhouse liner.
2. Disconnect wiring harness from pump.
3. Place holding container under pump to catch solvent from container.
4. Disconnect hose from pump.
5. Remove pump by pulling firmly.

INSTALLATION




1. Install pump by pushing firmly into opening in container.
2. Connect hose to pump.
3. Connect wiring harness to pump.
4. Install front push pin to wheelhouse liner.

NOTE: Do not reuse washer solvent as debris may clog the system.

5. Fill solvent container with washer solvent.