Transfer EVAP Canister to Replacement Fuel Tank Assembly

1. Disconnect the 5/8 in. 90° fuel tank vapor inlet hose fitting from EVAP canister.





2. Remove EVAP canister retainer clip at top of canister.

3. Install EVAP canister in mounting pocket on top of replacement fuel tank assembly.

4. Install EVAP canister retainer clip at top of canister. Ensure retainer clip is installed over lower flange of canister before snapping into place.





NOTICE:
Install purge fitting quick connector retainer into the female portion of connector. Care must be taken to ensure locking tab is centered in window of female connector.

(1) Canister Purge
(2) Vapor
(3) Vent

5. Install 5/8 in. 90° fuel tank vapor inlet hose fitting to TANK port on EVAP canister.