Assembly

ASSEMBLY





1. Install all damping bushings using tool KM-671 along with KM-907-13 and KM-907-14.





2. Install the stabilizer bar to the frame assembly
Torque: Stabilizer Bar Clamp-to-Frame Bolts: 20 Nm (15 ft. lbs.)

IMPORTANT: Use new bolts; torque retention of old bolts may not be sufficient.





3. Using Torque Angle Gauge SA9140E (or equivalent), install control arms to frame assembly using new bolts.
Torque: Control Arm-to-Frame: 90 Nm (66 ft. lbs.) + 75° to 90°