Door Lamp: Service and Repair
DOOR JAMB/AJAR SWITCHREMOVAL
1. Remove door jamb/ajar switch to the pillar fastener.
2. Disconnect electrical connector from door jamb/ajar switch.
3. Remove door jamb/ajar switch from vehicle.
INSTALLATION
1. Connect electrical connector to door jamb/ajar switch.
2. Install door jamb/ajar switch by positioning it on the pillar.
NOTE: When attaching fastener, be careful not to strip the threads in sheet metal.
3. Install door jamb/ajar switch to pillar with fastener.
Torque:
Door Jamb/Ajar Switch-to-Body Fasteners: 2.0 N.m (18 in-lbs)