Heated Oxygen Sensor 2, Bank 1 and Bank 2

TOOLS REQUIRED
^ J 39194C O2 Sensor Wrench

REMOVAL




1. Disconnect oxygen sensor electrical connector.
2. Remove oxygen sensor using O2 Sensor Wrench J 39194C.

INSTALLATION




1. Apply anti-seize material to threads of new oxygen sensor.
2. Install oxygen sensor using O2 Sensor Wrench J 39194C.

Torque:
Oxygen Sensors (Lower Exhaust Pipe): 45 N.m (33 ft-lbs)

3. Connect oxygen sensor electrical connector.