Assembly

ASSEMBLY





1. Using Bushing installation tools KM-671, KNI-906-42, and KM-906-43 install rear axle control arm front bushing.





2. Using Bushing Installation tools KM-671, KM-906-64, and KM-906-63 install the upper and lower rear axle control arm bushings.

NOTICE: New nut and bolt must be used. Torque retention of old nut and bolt may not be sufficient.





3. Install rear axle control arm bracket using new bolt.
Torque: Rear Axle Control Arm Bracket-to-Knuckle: 90 Nm (66 ft. lbs.)