Front Transaxle Mount (Manual)

FRONT TRANSAXLE MOUNT (MANUAL)

REMOVAL

CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON THE HOIST. TO HELP AVOID PERSONAL INJURY WHEN A VEHICLE IS ON A HOIST, PROVIDE ADDITIONAL SUPPORT FOR THE VEHICLE ON THE OPPOSITE END FROM WHICH COMPONENTS ARE BEING REMOVED.

1. Raise vehicle on hoist.





2. Remove front transaxle mount through bolt.





3. Remove transaxle mount to transaxle bolts.
4. Remove transaxle mount from vehicle.

INSTALLATION





1. Install transaxle mount to transaxle and tighten bolts.
Torque: Front Transaxle Mount-to-Transaxle Bolts: 90 Nm (66 ft. lbs.)





2. Install transaxle mount through bolt and tighten.
Torque: Front Transaxle Mount Through Bolt: 55 Nm (41 ft. lbs.)
3. Lower vehicle from hoist.