Cruise Control Module: Service and Repair

CRUISE CONTROL MODULE

REMOVAL




1. Ignition Off.
2. Remove cruise control module to bracket bolts leaving bracket attached to frame rail.
3. Remove cruise control throttle cable clip attached to front of dash.
4. Pull cruise control module up behind brake booster.
5. Disconnect cruise control module harness connector.




6. Disconnect cruise control throttle cable tab from throttle body cam.
7. Unclip cruise control throttle cable from both attachment clips.




8. Disconnect cruise control throttle cable from module (1) by rotating cable 1/4 turn counter-clockwise at module.
9. Remove cable from connecting strap.
10. Remove cruise control module.

INSTALLATION

IMPORTANT: Do not twist connecting strap during installation.




1. Connect cruise control throttle cable to cruise control module connecting strap.
2. Install cruise control throttle cable to cruise control module by rotating 1/4 turn clockwise.
3. Install cruise control module to bracket bolts and tighten.

Torque:
Cruise Control Module-to-Frame Rail Bracket Bolts: 10 N.m (89 in-lbs)




4. Install throttle cable clip to front of dash stud.
5. Install cruise control throttle cable tab to throttle body cam.
6. Install cruise control throttle cable to both attachment clips.
7. Connect cruise control module harness connector. Push in connector until a click is heard and pull back to confirm a positive engagement.
8. Adjust cruise control throttle cable. Refer to "Cruise Control Throttle Cable Adjustment".