Installation

INSTALLATION

1. Install power steering pump onto engine.





2. Install power steering pump to cylinder head attachment fasteners.
Torque: Power Steering Pump-to-Engine (L61): 25 Nm (18 ft. lbs.)





3. Install high pressure and return hoses to power steering pump.
Torque: Power Steering High Pressure Line-to-Pump (L61): 27 Nm (20 ft. lbs.)





4. Install high pressure and return hoses to steering gear.
Torque: Power Steering Lines-to-Steering Gear: 27 Nm (20 ft. lbs.)
5. Fill power steering pump fluid reservoir with clean power steering fluid (GM Spec. 9985010).
6. Bleed power steering system.