57. Drive, Driven Sprockets and Drive Link Install

DRIVE, DRIVEN SPROCKETS AND DRIVE LINK INSTALL





1. Install drive sprocket-to-drive sprocket support thrust washer-to-drive sprocket. Place tabs on thrust washer into holes on drive sprocket.
2. Retain thrust washer with petroleum jelly.
3. Install driven sprocket-to-driven sprocket support thrust washer onto driven sprocket support.

IMPORTANT: Orient drive link assembly in same direction in which drive link assembly was removed. If drive link assembly is new, it can be installed in either direction.

4. Install drive link assembly to drive and driven sprockets.
5. Install as a complete assembly, the drive sprocket, driven sprocket, and drive link assembly onto transaxle.