B3713

Schematic:

CIRCUIT DESCRIPTION
The Body Control Module (BCM) monitors the rear washer motor circuit 392. When a rear windshield wash is requested for more than two minutes, circuit 392 at battery voltage, the BCM will turn OFF the rear wiper motor if the rear wiper is NOT requested by the wiper switch.

Power for the rear washer motor is supplied through the front wiper fuse and rear washer switch. Grounding for the rear washer motor is through the OFF position of the front washer motor switch.

DTC PARAMETERS
^ Ignition in RUN or ACC
^ Rear washer circuit 392 at battery voltage for two minutes

DIAGNOSTIC AIDS
^ Inspect wiring harness for damage. Check for broken or chaffed insulation.
^ If fault is suspected to be intermittent, wiggling harness wiring may help in locating fault.

TEST DESCRIPTION

Diagnostic Chart: