Rear Compartment Lid Lock Cylinder Coding

DISASSEMBLY




1. Unhook return spring from case and pawl.
2. Remove cap from lock cylinder by inserting thin blade screwdriver between cap and case and carefully prying cap from case.

IMPORTANT: When shutter is removed, the shutter springs may fall out.

3. Remove shutter and shutter springs.




4. Insert key and rotate a quarter turn clockwise. Slide cylinder from housing.
5. Remove return spring and pawl from case.




6. Remove key and push tumblers out of lock cylinders using a thin bladed screwdriver.
7. If necessary, remove sidebar assembly by pushing it inward while tapping the cylinder, causing it to fall out.

ASSEMBLY




1. Select the correct tumblers for the desired code by the number stamped on the tumbler.

IMPORTANT: Make sure sidebar and tumbler springs are in place before installing tumblers.




2. Install tumblers by applying downward pressure until they lock into place.

IMPORTANT: When key is inserted into properly coded lock cylinder, all tumblers except the retainer tumbler will be flush with the lock cylinder.




3. Install pawl and return spring into case.
4. Insert key into cylinder, insert cylinder into housing and rotate quarter turn counterclockwise.




5. Install shutter springs and shutter.
6. Install cap to lock cylinder.
7. Hook return spring to pawl and case.