Brake Rotor/Disc
| Front | Brake Rotor Retaining Screw | 35 |
| Lateral Runout | 0.001 | |
| Thickness Variation | 0.0003 | |
| Diameter | 11.3 | |
| New Thickness (Nominal) | 0.98 | |
| Minimum Thickness After Refinish | 0.90 | |
| Discard Thickness* Brake drums and rotors have a discard diameter or thickness dimension cast into them. This is a wear dimension and not a refinish dimension. Any drum or rotor which does not meet the specification values should be discarded. | 0.87 | |
| Rear | Lateral Runout | 0.001 |
| Thickness Variation | 0.0004 | |
| Diameter | 11.25 | |
| New Thickness (Nominal) | 0.39 | |
| Minimum Thickness After Refinish | 0.35 | |
| Discard Thickness* Brake drums and rotors have a discard diameter or thickness dimension cast into them. This is a wear dimension and not a refinish dimension. Any drum or rotor which does not meet the specification values should be discarded. | 0.31 |