Fog/Driving Lamp: Service and Repair

FOG LAMP ASSEMBLY

REMOVAL




1. Remove headlamp housing.
2. Remove fog lamp bracket-to-impact bar attaching nuts.
3. Remove fog lamp assembly and bracket down through bottom of front fascia.
4. Remove fog lamp assembly from fog lamp bracket.

INSTALLATION




1. Install fog lamp assembly to fog lamp bracket.
2. Place fog lamp assembly and bracket into position through bottom of front fascia.
3. Install fog lamp bracket-to-impact bar attaching nuts.

Torque:
Fog Lamp Bracket-To-Impact Bar Attaching Nuts: 30 N.m (22 ft-lbs)

4. Install headlamp housing.