Removal

- TOOLS REQUIRED
- SA9162C-2 Power Steering Pump Pulley Installer
- SA9218NE Puller

REMOVAL

1. Remove air cleaner assembly.





1.1. Disconnect Manifold Air Flow (MAF) electrical connector.





1.2. Unsnap EVAP purge valve assembly and secure out of the way of air cleaner assembly.





1.3. Remove air cleaner lid.
1. Loosen hose clamp at throttle body.
2. Slide off flexible MAF hose-to-throttle body hose.
3. Unclamp air cleaner lid.
4. Remove air cleaner lid, MAF sensor, and hose as an assembly.
1.4. Remove air cleaner from air box.





1.5. Remove air box mount bolt.
1.6. Remove air box.





2. Remove power steering pump pulley bolts.





3. Relieve spring tension from accessory drive belt and remove belt from power steering pump pulley.
4. Remove pulley.





5. Place an approved drain container under the power steering pump.
6. Remove power steering pump pressure and return hoses and allow system to drain.





7. Remove power steering pump to bracket attachment fasteners.
8. Remove pump from vehicle.