15. Drive, Driven Sprockets and Drive Link Disassemble

DRIVE, DRIVEN SPROCKETS AND DRIVE LINK DISASSEMBLE





1. Remove turbine shaft to drive sprocket snap ring.
2. Remove drive sprocket from turbine shaft.
3. Remove Teflon(TM) seals from turbine shaft.
4. Discard Teflon(TM) seals.





5. Inspect drive sprocket, driven sprocket, drive link assembly, and turbine shaft for damage or excessive wear.
6. Inspect seal grooves for damage.
7. Inspect thrust washers for damage or excessive wear.
8. Clean and dry all components.