22. Drive, Driven Sprockets, Drive Link Removal

DRIVE, DRIVEN SPROCKETS, DRIVE LINK REMOVAL

IMPORTANT: When removing the drive link assembly note which direction the chain faces. You must later install the chain in the same direction in order to prevent excessive noise.





1. Remove, as an entire unit, the drive sprocket, turbine shaft, the driven sprocket and drive link assembly.
2. If the drive sprocket to drive sprocket support thrust washer has not remained with the drive sprocket assembly, remove drive sprocket to drive sprocket support thrust washer. The driven sprocket to driven sprocket support thrust washer should remain with the driven sprocket support assembly.