Wiper Blade Insert (Front) - 2000 (1ST Design)

IMPORTANT: Right and left wiper blades are different lengths. Make sure to check that longer blade is installed into left-hand side.

Removal




Remove the existing wiper blade insert by pulling on the insert at the base of the wiper blade assembly until insert is fully removed.

Installation

IMPORTANT:
^ Wiper blade insert can be installed from either end of the wiper blade.
^ Do not remove retainer clips from new wiper blade insert until installed.




1. Install the wiper blade insert by sliding it through the wiper blade claws until fully assembled into the wiper blade. Remove clips as needed when sliding insert through claws.




2. Secure the wiper blade insert to the wiper blade by pulling insert so that notches engage into heel claw.