Instrument Panel Cluster (IPC) - Trim Plate Bezel Replacement

Instrument Panel Cluster Trim Plate Bezel Replacement

Removal Procedure

1. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement (Service and Repair).
2. Remove the steering column trim cover. Refer to Steering Column Trim Cover Replacement in Steering Wheel and Column.
3. Move steering wheel to lowest position.




4. Remove the four fasteners.
5. Remove the cluster bezel.

Installation Procedure

1. Install the cluster bezel.

Notice: Refer to Fastener Notice in Cautions and Notices.




2. Install the bezel fasteners.

Tighten the bezel fasteners to 2.5 Nm (22 lb in).

3. Install the steering column trim cover. Refer to Steering Column Trim Cover Replacement in Steering Wheel and Column.
4. Install the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement (Service and Repair).