Instrument Panel Fuse Block - Both
REMOVAL1. Disconnect negative battery cable.
2. Disconnect positive battery cable.
3. Remove nuts holding the fuse block in place. (Two nuts towards front of vehicle, one rearward.)
4. Remove inlines that are attached to the fuse block bracket with rose buds. (Left I/P fuse block-body to I/P inline and premium sound system inline. Right I/P fuse block-body to I/P inline and CD inline.)
NOTE: Take care when removing inlines. The rose buds will be re-used on the replacement fuse block.
5. Remove I/P connector.
6. Remove body connector.
INSTALLATION
1. Install body connector.
2. Install I/P connector.
3. Align fuse block on the three studs (2 forward, 1 rearward).
4. Install nuts.
5. Install inline connectors to fuse block bracket. (Body to I/P inlines go to the outer rose bud attachment holes.)
6. Connect positive battery cable.
7. Connect negative battery cable.
IMPORTANT: The daytime running lamps (DRL) indicator, high beam indicator and turn signal indicators all use replaceable bulbs (blue base). All other telltales utilize LEDs which are not replaceable. Additionally, the instrument cluster contains six replaceable bulbs (blue base) for illumination and one replaceable bulb (white base) for odometer backlighting.