Wiring Harness Replacement - Front Door

REMOVAL




1. Remove door trim panel.
2. Remove water deflector (carefully peel off).
3. Remove front door outer panel.
4. Remove electrical connectors from power door lock, power mirror, power window and speaker (if equipped).
5. Remove wiring retainers from door structure.
6. Remove two rubber grommets.
7. Remove wiring harness.

INSTALLATION




1. Install wiring harness.
2. Install two rubber grommets.
3. Install wiring retainers to door structure.
4. Install electrical connectors to power door lock, power mirror, power window and speaker (if equipped).
5. Install front door outer panel.

IMPORTANT: Replace water deflector if damaged.

6. Install water deflector.
7. Install door trim panel.