Rear Seat Cushion Cover/Pad

REMOVAL




1. Pull on rear seat cushion retainer strap while pulling up on cushion to disengage rear seat cushion forward attachment.
2. Push rear seat cushion rearward to disengage rear attachment, then lift cushion out of vehicle while carefully routing seat belts through seat cushion opening.




3. Remove rear seat cushion draw string and remove rear seat cushion cover to expose hog rings.
4. Remove hog rings and staples, then remove cover.

INSTALLATION




1. Position rear scat cushion cover over rear seat cushion pad.
2. Install hog rings and staples to rear seat cushion cover and cushion pad/frame.
3. Pull draw string tight, and secure draw string opening to cushion frame.
4. Position rear seat cushion over rear seat floor area.
5. Route rear seat belts through cushion openings.




6. Slide rear seat cushion frame into rear attaching brackets.
7. Push downward at rear seat cushion forward retainers to lock cushion to floor brackets.
8. Check seat belts for proper routing through cushion.