52. Timing Belt Rear Cover Installation

ENGINE REAR COVER (UNIT REPAIR)

INSTALLATION

IMPORTANT: Ensure that the knock sensor and camshaft sensor wires are routed correctly before installing cover.





1. Install rear timing belt cover.
2. Coat engine cover bolts with Loctite 242@ thread locking compound (or equivalent).
3. Install rear timing belt cover bolts.
Torque:
Rear Timing Belt Cover Bolt: 8 Nm (71 inch lbs.)
4. Install rear timing belt thread pin.
Torque:
Rear Timing Belt Cover Threaded Pin: 10 Nm (89 inch lbs.)





5. Re-tighten the oil pump bolts.
Torque:
Oil Pump Bolts: 9 Nm (80 inch lbs.)