Window Front Guide Weatherstrip (Old Style) - Rear Door

REMOVAL




1. Run window in full down position.
2. Remove door trim panel.
3. Remove weatherstrip from guide.




4. Remove bolt and guide from vehicle.




5. Remove weatherstrip by lifting up and out of the door.

INSTALLATION

IMPORTANT: The old design (one piece weatherstrip) cannot be serviced with the new two piece design without using the new glass with the concave front edge.







1. Install weatherstrip to window run channel by sliding down and into the run channel.




2. Install guide and bolt into door.
3. Install door trim panel.
4. Verify correct operation throughout full up and down movement.