Front Seat Front Finish Panel Replacement (Outer)

Front Seat Front Finish Panel Replacement (Outer)

Removal Procedure

1. Remove the front seat. Refer to Front Seat Replacement - Bucket (Front Seat Replacement - Bucket).
2. In the case of manual seats, remove the recliner handle. Refer to Driver or Passenger Seat Recliner Handle Replacement (Driver or Passenger Seat Recliner Handle Replacement).




3. Remove the screws from the front seat finish panel.
4. Remove the front seat finish panel from the seat, starting at the recliner end of the panel.




5. In the case of power seats, disconnect the electrical connector from the switch.

Installation Procedure




1. If you are installing a new finish panel, transfer the power seat switch to the new panel.
2. Install the front seat finish panel, starting at the front of the panel.





Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the screws to the finish panel.

Tighten the screws to 2.5 Nm (22 lb in).

4. In the case of manual seats, install the recliner handle. Refer to Driver or Passenger Seat Recliner Handle Replacement (Driver or Passenger Seat Recliner Handle Replacement).
5. Install the front seat. Refer to Front Seat Replacement - Bucket (Front Seat Replacement - Bucket).