Radio Knobs and Fade Ring - AM/FM Stereo Radio

(1) FADE Ring (AM/FM Stereo Radio)
(2) VOL Knob (AM/FM Stereo Radio)
(3) BASS/TREB Knob (AM/FM Stereo Radio)

Removal




1. Adjust FADE ring to the middle position (where sound is balanced equally between all speakers).
2. Remove VOL/BAL knob by pulling straight out on the knob.
3. Remove FADE ring by pulling straight out on the ring.
4. Remove BASS/TREB knob by pulling straight out on the knob.

Installation




1. Install FADE ring over VOL/BAL knob post with the FADE ring in the middle position (where the sound is balanced equally between all speakers.)
2. Install VOL/BAL knob by placing knob over its post and pushing the knob onto radio.
3. Install BASS/TREB knob by placing knob over its post and pushing the knob onto radio.