Operation CHARM: Car repair manuals for everyone.

Heated Seat Switch Replacement

REMOVAL




1. Partially remove center trim plate by pulling at clip locations to disengage clips. Tilt trim plate sideways to access back of trim plate.
2. Disconnect left heated seat/fog switch and/or traction/right heated seat switch electrical connector(s).
3. Remove switch(es) by disengaging attaching clips.

INSTALLATION




1. Install switch(es) by snapping into place.
2. Connect wiring harnesses to switch(es).
3. Position center trim plate and secure to instrument panel by gently pushing at attaching clip locations.