Seat Back Beam Front Cover

REMOVAL




1. Remove rear seat back beam.




2. Remove rear seatback beam rear cover fasteners.
3. Starting at the bottom, gently pull on rear seat back beam rear cover to disengage attaching fasteners.
4. Pull upward on rear seat back beam rear cover to disengage locking tabs, then remove beam cover.
5. Gently pry open the rear seat back front cover at the beam ledge and remove rear seat back front cover.

INSTALLATION




1. Install rear seat back front cover onto rear seat back beam.
2. Position rear seat back beam rear cover locking tabs over rear seat back beam.




3. Push at attaching clip location and snap beam cover into place.
4. Install rear seat back beam rear cover fasteners.

Torque:
Rear Seat Back Beam Rear Cover Fasteners: 2 N.m (18 in-lbs)

5. Install rear seat beam.