Seat Back Beam Rear Cover

REMOVAL




1. Remove rear seat beam.
2. Remove rear seat back beam rear cover side fasteners.
3. Starting at the bottom of the cover, gently pull on cover to disengage attaching fasteners.
4. Pull upward on rear seat back beam rear cover to disengage locking tabs, then remove beam cover.

INSTALLATION




1. Position rear seat back beam rear cover locking tabs over rear seat back beam.
2. Push at attaching clip locations and snap beam cover into place.
3. Install rear seat back beam rear cover fasteners.

Torque:
Rear Seat Back Beam Rear Cover Fasteners: 2 N.m (18 in-lbs)

4. Install rear seat back beam.