Rear Compartment Lid Latch Replacement (With Remote Keyless Entry)

Rear Compartment Lid Latch Replacement (With Remote Keyless Entry)

Removal Procedure





Caution: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable from the battery.
2. Open the lid.
3. Remove the 2 bolts holding the lid latch to the lid.
4. Disconnect the lock cylinder rod and the wiring clip.

Installation Procedure

1. Connect the lock cylinder rod and the wiring clip.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Position the lid latch to the compartment lid and install the lid latch with the 2 bolts.

Tighten the rear compartment lid latch bolts to 10 Nm (89 lb in).

3. Close the lid.
4. Connect the negative battery cable to the battery.